Description

ET4410 100KHZ Desktop Digital LCR Meter Capacitance Resistance Impedance Inductance Measure LCR Bridge Meters

Model	ET4401	ET4402	ET4410
Digits	Main parameter: 5 digits; secondary parameter: 5 digits
Measurement Parameter	Main parameter: L/C/R/Z; secondary parameter: X/D/Q/θ/ESR
Measurement Range(L)	0.01μH – 9999H
Measurement Range(C)	0.01pF – 99999μF
Measurement Range(R)	0.01pF – 99999μF
Basic Accuracy	0.002
Test Frequency (Hz)	100~10kHz 10 point	100~20kHz 12point	100~100kHz 20 point
Measurement	2 times/second (slow), 4 times/second
Display Speed	(medium speed), 8 times/sec (fast)
Internal Bias	0-1500mV adjustable, 1mV stepping
Test Level	100mV, 300mV, 600mV, 1000mV, 1500mV, 2000mV
Correction Function	Open circuit correction, short circuit correction
Screening function	The screening limit can be set from -50% to + 50%
	with fixed points of 1%, 5%, 10% and 20%
Selection of comparator	Five gear sorting, third gear qualified, one gear failed, one ancillary gear
Communication Interface	Standard configuration: USB, RS232 (or 485),
	Handle interface; Optional: GPIB, USB Host
Others	Support DCR, electrolytic capacitor measurement mode,
	adjustable backlight brightness, optional in English and Chinese

More Information

● Measurement frequency up to 100kHz ● Test level 100 ~ 2000mV ●Support the measurement of DC resistance and electrolytic capacitor ●Internal bias voltage output (1mV-1500mV) ●Automatic identification of component measurement ●3.5-inch TFT display, 5 and a half bits display ●USB, RS232 communication interface, Handle sorting ● Data recording function (maximum and minimum values, average value) ● Support SCPI communication protocol ● Provide system settings, which can configure language, buzzer, screen brightness, etc accordingto the needs of users. ● Basic accuracy 0.2% ● Manual and automatic range ● Be equipped with open circuit and short circuit correction ● Comparator has sorting and alarm function ● Provide a variety of test ports