Description
1100GPH 750GPH 500GPH 350GPH 12v 24VDC bilge pump High Flow Submersible water pump with float switch
Specification:
|
Model |
Flow rate |
Head |
voltage |
current |
wire lead |
outlet port diameter |
|
350GPH bilge pump with float switch |
350 |
3mm |
12v / 24v |
1.8A / 1A |
100cm |
19mm |
|
500GPH bilge pump with float switch |
500 |
3m |
12v / 24v |
2.2A / 1.2A |
100cm |
19mm |
|
750GPH bilge pump with float switch |
750 |
4m |
12v / 24v |
2.5A / 1.5A |
100cm |
19mm |
|
1100GPH bilge pump with float switch |
1100 |
4m |
12v / 24v |
3A / 1.5A |
100cm |
29mm |
Package include:
bilge pump *1
float switch*1
Bilge Pump Description:
1.Use special material to do waterproof seal, waterproof, insulation strong, with high safety.
2.driven by permanent magnet motor, small size, shape is the size of tinned coke cans, little vibration, low noise, large flow 50 l/Min (3.0 m3 / h), using a 12 v / 24 v dc regulated power supply, low to reduce the electricity cost, cost-effective to implement low cost, high efficiency and energy saving, long service life, can work 24 hours continuously, intermittent work more favourable to prolong the service life of the pump.
3. Easy installation; Pump with grille bar filter, easy to remove, easy clean, simple; Automatic filtering larger objects, protect the pump work, extend the service life of pump.
4. This series of miniature submersible pump can smoke particles is small, less oil and other impurities, in order to prolong the service life of pump, suggest the pump for maintenance on a regular basis, to remove residual dirt, and other objects on the pump.
5. The pump shaft is made of stainless steel manufacturing, durability, corrosion, fresh water, sea water can be used;
6. Can be widely used in sewage sampling, large flow rate of liquid transfer and low noise for the workplace; Large and super large aquarium, small swimming pool, reservoir filling water, fountains, and other purposes.
7. Adopt stainless steel shaft and the toughness moisture proof thermoplastic plastic pump body,
8. Can dive and burning protection.
9. Long life water-cooled motor.
10. Easy to install and remove the filter device, ensure the pump running without vibration free.
11. A short time without water won't burn out pump operation.
Main application:
1.Can be widely used in sewage sampling, large flow rate of liquid transfer and low noise for the workplace;
2.Large and super large aquarium, small swimming pool, reservoir filling water, fountains, and other purposes.
3.Fresh water, sea water quality analysis sampling, water purification, sewage treatment, sewage, round bilge sewage, aquaculture, water transfer, agricultural spraying, irrigation, floor, carpet cleaning, etc.;
4.Applicable industry: environmental protection, medicine, shipbuilding, fisheries aquaculture, such as industry, agriculture, domestic industry.
Applicable fields:
1.Environmental protection,
2.medicine,
3.shipbuilding,
4.fish farming,
5.industry,
6.agriculture,
7.home economics, etc.
How a bilge pump works:
Non-automatic submersible pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. They are designed to fit in the lowest part of the bilge and only require discharge pipe work and electricity supply.
Bilge Switch Description:
A bilge pump float switch is a smart device used in boats that turns on a bilge pump when the water in the bilge reaches a certain level. It is a must-have in any boat that is left unattended for any length of time, as all boats tend to leak at least some water. This switch is submerged, so you need to waterproof the electrical connections and hang the wires to ensure they stay as dry as possible.
Ideal flow sensor for bilge pumps
Heavy duty flow switch is designed for the toughest applications
Our bilge pump float switch is safer than mercury switches, this switch utilizes a mercury-free rolling ball mechanism and includes an exclusive anti-spike feature to prevent the rapid on/off cycling encountered with some switches. Made of rugged thermoplastic. Universal design works with all 12V, 24V and 32V bilge pumps.
1. Turn pump on when water level reaches 2'' (51mm)
2. Turn pump off when water level reaches 3/4'' (19mm)
3. Ideal flow sensor for bilge pumps
4. Heavy duty flow switch is designed for the toughest applications
Application:
The float switch is good for yachtsmen, commercial fisherman & boat builders all over the world.For use with pumps drawing up to 20 amps.
Reviews
There are no reviews yet.