JDS2800 Fully CNC Dual Channel DDS Function Arbitrary Wave Signal Source Generator

Description

Condition: 100% brand new

Element Type: Signal Generator

Material: Silicone, ABS (Fireproof)

Model No.: JDS2800-15 MHz

Frequency Characteristics:

Sinus wave frequency range: 0-15 MHz

Square wave frequency range: 0-15 MHz

Frequency range of triangular waves: 0-15 MHz

Pulse waves Frequency range: 0-6 MHz

Digital wave frequency range: 0-6 MHz

Frequency range of arbitrary waves: 0-6 MHz

Pulse width adjustment range: 100NS-4000s

Square Waves Lifting Time: ≤25NS

Minimum frequency resolution: 0.01 μHz (0.00000001)

Frequency accuracy: ±20 billion

Frequency stability: ±1PPM/3h

Characteristics of waves:

Waveform types: sinusoidal waves, square waves, pulse waves (adjustable working cycle, pulse width and cycle time can be accurately adjusted), triangular waves, partial sinusoidal waves, CMOS waves, DC level (set DC amplitude by adjusting displacement), half wave Rise, exponential fall, multison waves, load pulse, Lorentz pulse and 60 custom waveforms

Wavelength: 2048 points

Waveform Sampling Speed: 266 ms/s

Waveform Vertical resolution: 14 bits

Sinus waves:

Harmonic suppression: ≥45DBC (total harmonic distortion: square waves and pulse

Pulse Waves Working cycle adjustment range: 0.1%-99.9%

Partial sinusoidal working cycle adjustment range: 0.1%-99.9%

Wave Linearity: ≥98% (0.01 Hz-10 kHz)

Output Characteristics:

Amplitude resolution: 1 mV

Amplitude stability: ±0.5%/5 hours

Amplitude flatness: ±5% (10MHz)

Wave output:

Output impedance: 50 Ohm ± 10% (typical)

Protection: All signal output terminals can operate within 60 short-circuit load conditions

DC Displacement:

Offset Range: Offset≤10-Amplitude/2

Displacement resolution: 0.01 V

Phase Characteristics:

Phase adjustment range: 0-359.9°

Phase resolution: 0.1°

TTL/CMOS Output:

Low Level: High Level: 1V-10V

Lift/Drop Time: External Measurement Function:

Frequency counter function:

Frequency measuring range: 1 Hz-100 MHz

Measurement accuracy: continuous closure time adjustment 0.01S-10S

Counter: function:

Counting range: 0-4294967295

Communication mode: DC and AC coupling modes

Calculation method: Manual

Pulse width measurement: 0.01 s resolution, maximum measurable 20 s

Period measurement: 0.01us resolution, maximum measurable 20s.

Deployment function:

Channel: CH1 or CH2

Frequency Dissolver Type: Linear Dissolver, Logarithmic Dissolver

Development time: 0.1S-999.9s

Setting range: arbitrarily set between the starting point (0.01 Hz) and the maximum output frequency of the corresponding model at the end point

Cleaning direction: forward, backward and reverse

Explosion Function:

Number of pulses: 1-1048575

Explosion mode: manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)

General specifications:

Display Type: 2.4 inch color LCD TFT display

Storage and Loading:

Quantity: 100 groups

Location: 00 – 99 (the default storage location parameter 00 is called when the machine is turned on)

Optional waveform: Quantity: 60 groups from 1 to 60 (default 15 groups at launch)

Interface:

Interface Mode: Using USB for Consistent Interface

Expansion interface: TTL level mode serial port, user-friendly for development

Communication speed: using standard 115200bps

Communication protocol: using command line mode, the protocol is open

Output: DC5V±0.5V

Environment: Temperature: 0-40℃; Humidity:

Equipment

1 x signal generator

1 X Power Adapter

1 X USB cable

1 x pluggable signal cable

1 X English Manual

1 x CD

1 x BNC cable