Description

Feature:

*When your compressor runs so loud or does not build pressure, please use this compressor for Ring kit to fix it.

*Fits model number 165080, this for Ring kit fits for many models compressor.

*Extremely easy to install the kit, just take the cylinder apart, the new sleeve has a rolled bottom so you need to remove the piston from the shaft and slide it up over piston, put the for Ring on piston before inserting into sleeve will be easier.

*It is recommended on Twin Cylinder Air Compressor Pumps that both cylinder sleeves and piston rings be replaced at the same time so that the air compressor pump will produce equal air output and not be out of balance.

*Cylinder dimension: Inside Diameter: 2.365 inch; Outside Diameter: 2.495 inch; Outside Shoulder: 2.945 inch; Total Height: 1.980 inch.

Specifications:

Product Name: Cylinder Sleeve Repair Kit

Material: Steel+rubber

Color: As shown

Size:Inside Diameter: (Approx. ) 60mm / 2.36''

Outside Diameter: (Approx. ) 63mm / 2.49''

Outside Shoulder: (Approx. ) 75mm / 2.94''

Total Height: (Approx. ) 50mm / 1.98''

Suitable for: many models compressor.

Quantity: 5pcs/Set

Package Content:

1 × Coated Cylinder Sleeve

1 × Coated Oil Piston for Ring

1 × Piston Rod Cap Screw

1 × Valve Plate to Cylinder Sleeve O- for Ring

1 × Cylinder head to Valve Plate O- for Ring

Note:

1.Transition: 1cm=10mm=0.39inch.

2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3. Please allow slight manual measurement deviation for the data.