MAL Series Aluminum Alloy Mini Cylinder
Mal Aluminum Alloy Mini Cylinder Adopts Aluminum Tube Cylinder Body,
Built-In Non-Installable Magnetic Ring,
The Front And Rear Covers Are Connected With The Steel Pipe By Thread
The Piston Sealing Ring Adopts A Heterosexual Two-Way Sealing Structure,
Compact Size.
The Back Cover Defaults To Ca Installation,
There Are Also A Variety Of Back Cover Forms,
A Variety Of Installation Accessories Can Be Selected To Provide Customers With Options.

Installation And Application
1. When Load Changes In The Work, The Cylinder With Abundant Output Capacity Shall Be Selected.
2. Relative Cylinder With High Temperature Resistance Or Corrosion Resistance Shall Be Chosen Under The Condition Of High Temperature Or Corrosion.
3. Necessary Protection Measure Shall Be Taken In The Environment With Higher Humidity, Must Dust Or Water Drops, Oil Dust And Welding Dregs.
4. Dirty Substances In The Pipe Must Be Eliminated Before Cylinder Is Connected With Pipeline To Prevent The Entrance Of Particles Into The Cylinder.
5. The Medium Used By Cylinder Shall Be Filtered To 40 um Or Below.
6. Anti-freezing Measure Shall Be Adopted Under Low Temperature Environment To Prevent Moisture Freezing.
7. To Avoid Side Load, Otherwise, Piston Rod Well Be Bent And Deformed And Damage At The End Of The Rod. Single-Acting Type
8. If The Cylinder Is Dismantled And Stored For A Long Time, Please To Conduct Anti-rust Treatment TO The Surface. Anti-Dust Caps Shall Be Added In Air Inlet And Outlet Ports. The Front And Back Cover Can Not Be Dismantled, Which Shall Be Especially Noticed.