Description
Welcome to Lixinsheng Packing Equipment Store
Construction:
Body width:22mm
Media:Air
No of positions and Ports:2 Position, 5 Ports
Body type:Body ported type
Port Size:IN/OUT = 1/4" NPT, Exhaust= 1/8" NPT
Pressure Range:0.2~0.8Mpa
Solenoid valve is a basic components used to control the fluid , belonging to the actuator, not limited to used in hydraulic, pneumatic. Solenoid valve used to control the direction of the air flow, the factory machinery are generally controlled by hydraulic cylinders, so the solenoid valve is needed.
MVSC-220 series solenoid valve body width 22mm, there have 3 ported 2 position,5 ported 2 Position,5 ported 3 position for option. Port size is 1/4’’ NPT, body ported type, linking seat type, the maximum pressure is 7kgf / cm2 , Flow 710 ~ 799Nl / min (5/3)
Specification:
|
Model |
3.00E+01 |
3.00E+02 |
4.00E+01 |
4.00E+02 |
4E2C.P.R |
|
Bore No. |
10A |
||||
|
Port size |
Rc3/8 |
||||
|
No. of port |
3 |
5 |
|||
|
No. of position |
2 |
3 |
|||
|
Medium |
Air |
||||
|
Operating pressure range |
0.2~0.8 Mpa |
0.3~0.8 Mpa |
|||
|
Operating pressure (LP) |
0~0.8 Mpa |
||||
|
External pilot pressure (LP) |
0.2~0.8 Mpa |
0.3~0.8 Mpa |
|||
|
Proof pressure |
1 Mpa |
||||
|
Effective orifice |
30 mm2 |
35 mm2 |
25mm2 |
||
|
Response time |
50 ms |
||||
|
Ambient temperature |
-5~+50 ℃ |
||||
|
Voltage |
AC110V, 220V (50/60) Hz, 24VDC |
||||
|
Power consumption |
AC=4.8.4,4VA, 6/4.9VA, DC=2W |
||||
|
Available voltage range |
± 10% |
||||
|
Insulation class |
F class |
||||
|
Weight |
350 g |
439 g |
293 g |
387 g |
565 g |
Product Introduction
Selection basis:
1. According to the pipeline parameters to select the solenoid valve: diameter specifications (ie DN), interface mode
1) Determine the diameter (DN) size according to the size or flow requirements of the site pipe;
2) Interface, general> DN50 to select the flange interface, ≤ DN50 can be freely selected according to user needs.
2.According to the fluid parameters to select the solenoid valve: material, temperature group
1) Corrosive fluid: should use corrosion-resistant solenoid valve and all stainless steel;
2) Edible clean fluid: should use food grade stainless steel solenoid valve;
3) High temperature fluid: to choose to use high temperature electrical materials and sealing materials made of solenoid valve, but also to choose the type of piston structure;
4)Fluid state: large to have a gaseous, liquid or mixed state, especially when the diameter is greater than DN25 must be distinguished;
5) Fluid viscosity: usually below 50cSt can be arbitrarily selected, if more than this value, will use high viscosity solenoid valve.
More products pls kindly click here :Lixinsheng Packing Equipment Co.,Ltd Store
As the following is a table of other spec. , pls choose the perfect match standard you need.
Reviews
There are no reviews yet.