Description
【SPECIFICATION】
🟣Directly for small pneumatic tools air intake filtration moisture in the air.
🟣Pressure range: pressure 1-9kg / cm².The maximum pressure less than 9.9kg / cm²
🟣Thread Size: male side connection British units 1/4 "
🟣Temperature range: 41-140 ℉ (5-60 ℃)
🟣Flow rate: 141 SCFM (4000 L/min) @ 90 PSI
🟣The female side can be directly connected to the gun, screw-type inlet connector British units 1/4 "Are threaded connections.
🟣Performance: In the case of spraying demanding, high-end gun necessary aids. Fast interfaces directly to the spray gun, ensure that the paint after paint atomizing not mixed with any moisture inside. Making higher quality paint spraying.
【FEATURE】
●1/4 "NPT semi-automatic drain air pressure filter/regulator device, which allows you to obtain accurate pressure under full control of the pressure gauge.
●The filter can filter fine particles and dust, keep the air dry and clean, have a longer service life and can be reused.
●5 micron brass ball valve is easy to install and disassemble, so that you can obtain the adjusted pressure value at any time.
Easy to operate。
●Perfect replacement for a water separator/pressure regulator that got broke.
Very compact design. Perfect for HVLP & airbrush use.
😊Note:
*Spray gun is not included.
●Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
●Please allow 1-2cm measuring deviation due to manual measurement.
Reviews
There are no reviews yet.