Description
Sine wave (peak to peak)
0-5M 5M-10M10M- 15M[15M-30M30M-40M 40M- 50M|
0-20V|0-10V 0-6V
0-3V
0-2.5V | 0-1.5V
Output modulation
Frequency sweep, burst, voltage controlled output (VCO) pulse modulation
Sine wave, square wave, triangular wave, rising sawtooth wave, falling sawtooth wave, half wave
Type of waveform
Wave, full wave, multi frequency Lorentz magnetic force, amplitude modulated wave, Sink pulse
White noise, exponential rise, exponential fall, trapezoidal wave, DC signal
Ascending trapezoidal wave, descending trapezoidal wave, and 15 sets of user-defined waves
Frequency error+8×10-6
Output impedance 500+10%
Amplitude resolution of 10mVp-p
Amplitude stability+0.5% (every 5 hours)
Amplitude error ± 1%+10mV (frequency 1KHz, 8 Vp-p)
Bias range -10V~+12V
Harmonic offset of 40dBc (<1MHz), 35dBc (1MHz~5MHz)
Distortion<0.8% (20Hz~20KHz)
Lifting edge time ≤ 20ns
Overshoot s10%
Duty cycle adjustment range 0.1%~99.9%
Frequency measurement range
0.01Hz ~ 100MHz
Periodic measurement
Maximum measurement of 205, resolution of 0.01uS
pulse width measurement
Maximum measurement of 20S, resolution of 0.01uS
Minimum input voltage 0.5Vp-p
Maximum allowable input voltage 10Vp-p
Counting range 0~4294967295
restart at
manual
Source selection
Ext.IN input (analog signal)
Quantity 15
Positions M1 to M15
The interface method adopts USB to serial interface
Communication speed 57600 bps
communication protocol
Using command-line approach, the protocol is publicly available
VOC voltage input port
Left negative pole, right positive pole DC5V (with overvoltage protection)
Length x Width x Height 187×71 x24mm
Reviews
There are no reviews yet.