Description

Remove and install the valve core from a 1/4-inch male flare access fitting without the loss of refrigerant.

Durable solid brass tool has a ball valve that can be opened and closed in just a quarter-turn rather than a stem-type valve.

Designed with a stainless-steel ball for durability and long life.

Enclosed the high side and low side coupler.

name:Valve Core Remover Tool

Type: tubeless valve nozzle

Style: English mouth

Assembly method: buckle type

Applicable models: Most

Application Steps:

(1)Take a look at the valve core removal.

(2)Unscrew the low-side (or high-side if that’s what you are fixing) port cap.

(3)Connect the valve removal tool.

(4)Insert the extractor.

(5)Unscrew the old valve core.

(6)Pull the valve core up.

(7)Remove the valve core.

(8)The valve core is now out.

(9)Put the new valve core on the rob.

(10)Install the new valve core.

(11)Place the protective cap back on the low side port.

Condition: 100% Brand New and Never Used.

High Pressure: Red coupler, with inner diameter 16mm.

Low Pressure: Blue coupler, with inner diameter 13mm.

Valve Core: R134/R12.

Colour:As Shown

Material:copper

Package Contents:

1 set x Valve Core Remover Tool(1 Pc x air conditioner R134A Valve Core Remover / Installer High Side (Red),1 Pc x air conditioner R134A Valve Core Remover / Installer Low Side (Blue))

Only the above package content, other products are not included.

Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.